Failure Analysis

Total Customer Satisfaction

Analytical Capability

`

SCANNING ELECTRON MICROSCOPE (SEM) / EDX

Scanning Electron Microscope

Machine

SEM /EDX capability established in ASEM since 1997

This analytical technique used for image magnification and elemental analysis or chemical characterization

 

MODEL : HITACHI S-2380N

OPERATING RANGE -:

ENERGY DISPERSIVE : 0.5KV ~ 30KV

MAG : (40 ~ 200K)X

Output

TIME DOMAIN REFLECTROMETRY (TDR)

Time Domain Reflextrometry(TDR)

Machine

MODEL : TDS 800

OPERATING RANGE :

80E05 - 40GHz

80E06 - 50GHz

To characterize and locate faults in metallic cables with objective for fault isolation failure location

VISUAL INSPECTION SCOPES

High Power Magnification

Machine
Output

High Power Magnification from 100X to 1KX

High Mag Optical Scope

Model: BX60

Nikon Optihot Operating Range -:

Mag: 100X - 1KX

Low Power Magnification

Machine
Output

Low Power Magnification from 6X to 60X

Low Mag Optical Scope

Model : S2X9/AB Cellon

Operating Range -:

Mag : 6X - 60X

CURVE TRACER

Electrical Bench Test ( Curve Tracer )

Machine

A non destructive Method for finding electrically damaged pins on IC chips.

Model : HP Analyzer 4155A & Agilent Analyzer 4155C

Operating Range :-

- Max Current: 100mA

- Max Voltage : 185V

Output
Sample Short IV Curve
Sample Of Open IV Curve

Microprober

Microprober ITH Antivibration Table

Machine

Fault isolation test between package and die

Microprober

Model : Wentworth

Operating Range :-

Max Current : 100mA

Max Voltage : 185V

X-RAY

X-Ray

Machine

Model : PCBA Analyzer

Operating Range :-

- X-Ray Tube Voltage Range : 20kV TO 160Kv

- X-Ray Tube Current Range : 0µA TO 300µA

Sample 1
Sample 2
SAMPLE OF X-RAY IMAGES

To X-ray any damages/ defect on wires or solder balls.

CHEMICAL DECAP (AUTO)

AUTODECAP MACHINE (GOLD/COPPER WIRES PRODUCT)

Machine

To remove the after mold unit to analysis the defect

Wet Decapping (Manual)
- Fuming Nitric Acid
Auto Decaper
- Auto Decaper Using Nitric & Sulfurix Acid
Dry Decap
- Hot Plate

Output

Unit After Decap

Unit After Decap

CHEMICAL DECAP (MANUAL)

Manual Decaper

Machine

Model : Favorit

Operating Range :-

Fuming Sulphuric & Notric Acid

Remp : 50°C - 300°C

Output

Sample 1

Sample 2

LASER DECAP

Laser Decap (Gold/Copper Wires Product)

Machine

Laser Decaper


- Laser Decap Using Laser Power

Output

Package After Thin Down Compound Using Laser Decap

CROSS SECTION EQUIPMENT

Package Cross-Sectioning

Machine

Cross Section

Model : Buehler

Operating Range -:

120 GRITS ( Roughest )

4000 GRITS ( Smoothest )

Micropolish : 5.0µ to 0.05µ

Output

Cross section to the desire area to the angle of interest for failure analysis


Sawing / Grinding / Polishing

- Buehler Equipment

- Polishing Down To 0.05 µm

- Au / Cu Ball Cross Section For Bond Pad Metal Collapse

- Al Inter Metalisation

ASE Electronics (M) SDN BHD (212592 - H)
Plot 20, Phase IV, Free Industrial Zone, 11900 Bayan Lepas, Penang.
Tel: 604 - 632 8888 Fax: 604 - 644 8411
Copyright ©2016 ASE Electronics Malaysia. All Rights Reserved.